75 lines
2.6 KiB
Text
75 lines
2.6 KiB
Text
; Asterisk SMDI configuration
|
|
|
|
[interfaces]
|
|
; Specify serial ports to listen for SMDI messages on below. These will be
|
|
; referenced later in zapata.conf. If you do not specify any interfaces then
|
|
; SMDI will be disabled. Interfaces can have several different attributes
|
|
; associated with them.
|
|
|
|
; Set the number of stop bits to use per character here. The default is no,
|
|
; in which case one stop bit will be used.
|
|
|
|
;twostopbits = no
|
|
|
|
; Character size or bit length is the size of each character sent across the
|
|
; link. Character size can be 7 or 8. The default is 7.
|
|
|
|
;charsize = 7
|
|
|
|
; If you need parity checking enabled you can turn it on here. Acceptable
|
|
; values are even, odd, and none. The default is even.
|
|
|
|
;paritybit = even
|
|
|
|
; The baudrate to use for this port. Acceptable values are 1200, 2400, 4800,
|
|
; and 9600. The default is 9600.
|
|
|
|
;baudrate = 1200
|
|
|
|
; Often the numbering scheme for a set of mailboxes or extensions will not be 7
|
|
; or 10 digits (as SMDI requires). Use the msdstrip option to strip unused
|
|
; digits from the start of numbers.
|
|
|
|
;msdstrip = 0
|
|
|
|
; Occasionally Asterisk and the SMDI switch may become out of sync. If this
|
|
; happens, Asterisk will appear one or several calls behind as it processes
|
|
; voicemail requests. To prevent this from happening, adjust the msgexpirytime.
|
|
; This will make Asterisk discard old SMDI messages that have not yet been
|
|
; processed. The default expiry time is 30000 milliseconds.
|
|
|
|
;msgexpirytime = 30000
|
|
|
|
;smdiport => /dev/ttyS0
|
|
|
|
|
|
[mailboxes]
|
|
; This section configures parameters related to MWI handling for the SMDI link.
|
|
|
|
; This option configures the polling interval used to check to see if the
|
|
; mailboxes have any new messages. This option is specified in seconds.
|
|
; The default value is 10 seconds.
|
|
;
|
|
;pollinginterval=10
|
|
|
|
; Every other entry in this section of the configuration file is interpreted as
|
|
; a mapping between the mailbox ID on the SMDI link, and the local Asterisk
|
|
; mailbox name. In many cases, they are the same thing, but they still must be
|
|
; listed here so that this module knows which mailboxes it needs to pay
|
|
; attention to.
|
|
;
|
|
; Syntax:
|
|
; <SMDI mailbox ID>=<Asterisk Mailbox Name>[@Asterisk Voicemail Context]
|
|
;
|
|
; If no Asterisk voicemail context is specified, "default" will be assumed.
|
|
;
|
|
; Before specifying mailboxes, you must specify an SMDI interface. All mailbox
|
|
; definitions that follow will correspond to that SMDI interface. If you specify
|
|
; another interface, then all definitions following that will correspond to the
|
|
; new interface.
|
|
;
|
|
;smdiport=/dev/ttyS0
|
|
;2565551234=1234@vmcontext1
|
|
;2565555678=5678@vmcontext2
|
|
;smdiport=/dev/ttyS1
|
|
;2565559999=9999
|