193 lines
7.5 KiB
Text
193 lines
7.5 KiB
Text
; Radio Repeater / Remote Base configuration file (for use with app_rpt)
|
|
; As of app_rpt version 0.39, 12/20/2005
|
|
;
|
|
|
|
;[000] ; Node ID of first repeater
|
|
|
|
;rxchannel = Zap/1 ; Rx audio/signalling channel
|
|
; Note: if you use a unified interface (tx/rx on one channel), only
|
|
; specify the rxchannel and the txchannel will be assumed from the rxchannel
|
|
;txchannel = Zap/2 ; Tx audio/signalling channel
|
|
;duplex = 2 ; (Optional) set duplex operating mode
|
|
;; 0 = half duplex (telemetry and courtesy tones do not transmit)
|
|
;; 1 = semi-half duplex (telemetry and courtesy tones transmit, but not
|
|
;; repeated audio
|
|
;; 2 = normal full-duplex mode (Default)
|
|
;; 3 = full-duplex mode, without repeated audio from main input source
|
|
;functions = functions-repeater ; DTMF function list
|
|
;; specify this for a different function list then local when on link
|
|
;;link_functions = functions-different ; DTMF function list for link
|
|
;;phone_functions = functions-phone ; (optional) different functions for 'P' mode
|
|
;;dphone_functions = functions-dphone ; (optional) different functions for 'D' mode
|
|
;;nodes = nodes-different ; (optional) different node list
|
|
;tonezone = us ; use US tones (default)
|
|
;context = default ; dialing context for phone
|
|
;callerid = "WB6NIL Repeater" <(213) 555-0123> ; Callerid for phone calls
|
|
;idrecording = wb6nil ; id recording
|
|
;accountcode=RADIO ; account code (optional)
|
|
;funcchar = * ; function lead-in character (defaults to '*')
|
|
;endchar = # ; command mode end character (defaults to '#')
|
|
;;nobusyout=yes ; (optional) Do not busy-out reverse-patch when
|
|
; normal patch in use
|
|
;hangtime=1000 ; squelch tail hang time (in ms) (optional)
|
|
;totime=100000 ; transmit time-out time (in ms) (optional)
|
|
;idtime=30000 ; id interval time (in ms) (optional)
|
|
;politeid=30000 ; time in milliseconds before ID timer
|
|
; expires to try and ID in the tail.
|
|
; (optional, default is 30000).
|
|
;idtalkover=|iwb6nil/rpt ; Talkover ID (optional) default is none
|
|
;unlinkedct=ct2 ; unlinked courtesy tone (optional) default is none
|
|
|
|
;; The tailmessagetime,tailsquashedtime, and tailmessages need to be set
|
|
;; to support tail messages. They can be omitted otherwise.
|
|
;tailmessagetime=300000 ; Play a tail message every 5 mins
|
|
;tailsquashedtime=30000 ; If squashed by another user,
|
|
;; try again after 30 seconds
|
|
;tailmessages=msg1,msg2,msg3 ;list of messages to be played for tail message
|
|
|
|
; The default values for hangtime, time-out time, and id interval time are
|
|
; 5 seconds (5000 ms), 3 minutes (180000 ms), and 5 minutes (300000 ms)
|
|
; respectively
|
|
|
|
;[001] ; Node ID of first repeater
|
|
|
|
;rxchannel = Zap/3 ; Rx audio/signalling channel
|
|
; Note: if you use a unified interface (tx/rx on one channel), only
|
|
; specify the rxchannel and the txchannel will be assumed from the rxchannel
|
|
;txchannel = Zap/4 ; Tx audio/signalling channel
|
|
;functions = functions-repeater ; DTMF function list
|
|
;; specify this for a different function list then local when on link
|
|
;;link_functions = functions-different ; DTMF function list for link
|
|
;;phone_functions = functions-phone ; (optional) different functions for 'P' mode
|
|
;;dphone_functions = functions-dphone ; (optional) different functions for 'D' mode
|
|
;;nodes = nodes-different ; (optional) different node list
|
|
;tonezone = us ; use US tones (default)
|
|
;context = default ; dialing context for phone
|
|
;callerid = "WB6NIL Repeater" <(213) 555-0123> ; Callerid for phone calls
|
|
;idrecording = wb6nil ; id recording
|
|
;accountcode=RADIO ; account code (optional)
|
|
;funcchar = * ; function lead-in character (defaults to '*')
|
|
;endchar = # ; command mode end character (defaults to '#')
|
|
;;nobusyout=yes ; (optional) Do not busy-out reverse-patch when
|
|
; normal patch in use
|
|
;hangtime=1000 ; squelch tail hang time (in ms) (optional)
|
|
;totime=100000 ; transmit time-out time (in ms) (optional)
|
|
;idtime=30000 ; id interval time (in ms) (optional)
|
|
;politeid=30000 ; time in milliseconds before ID timer
|
|
; expires to try and ID in the tail.
|
|
; (optional, default is 30000).
|
|
;idtalkover=|iwb6nil/rpt ; Talkover ID (optional) default is none
|
|
;unlinkedct=ct2 ; unlinked courtesy tone (optional) default is none
|
|
|
|
;[002] ; Node ID of remote base
|
|
|
|
;rxchannel = Zap/5 ; Rx audio/signalling channel
|
|
; Note: if you use a unified interface (tx/rx on one channel), only
|
|
; specify the rxchannel and the txchannel will be assumed from the rxchannel
|
|
;txchannel = Zap/6 ; Tx audio/signalling channel
|
|
;functions = functions-remote
|
|
;remote = ft897 ; Set remote=y for dumb remote or
|
|
; remote=ft897 for Yaesu FT-897 or
|
|
; remote=rbi for Doug Hall RBI1
|
|
;iobase = 0x378 ; Specify IO port for parallel port (optional)
|
|
|
|
;[functions-repeater]
|
|
;1=ilink,1 ; Specific link disconnect
|
|
;2=ilink,2 ; Specific Link connect - monitor only
|
|
;3=ilink,3 ; Specific Link connect - transceive
|
|
;4=ilink,4 ; Enter command mode on a specific link
|
|
;7=ilink,5 ; Link status
|
|
;;XX=ilink,6 ; Disconnect all links (not used here)
|
|
|
|
;80=status,1 ; System info
|
|
;81=status,2 ; Time
|
|
;82=status,3 ; app_rpt.c Version
|
|
|
|
;6=autopatchup ; Autopatch up
|
|
;0=autopatchdn ; Autopatch down
|
|
|
|
;90=cop,1 ; System warm boot
|
|
;91=cop,2 ; System enable
|
|
;92=cop,3 ; System disable
|
|
|
|
;[functions-remote]
|
|
|
|
;0=remote,1 ; Retrieve Memory
|
|
;1=remote,2 ; Set freq.
|
|
;2=remote,3 ; Set Rx PL tone.
|
|
;40=remote,100 ; Rx PL off
|
|
;41=remote,101 ; Rx PL on
|
|
;42=remote,102 ; Tx PL off
|
|
;43=remote,103 ; Tx PL on
|
|
;44=remote,104 ; Low Pwr
|
|
;45=remote,105 ; Med Pwr
|
|
;46=remote,106 ; Hi Pwr
|
|
;5=remote,5 ; Status
|
|
|
|
;[telemetry]
|
|
|
|
; Telemetry entries are shared across all repeaters
|
|
; Can be a tone sequence, morse string, or a file
|
|
;
|
|
; |t - Tone escape sequence
|
|
;
|
|
; Tone sequences consist of 1 or more 4-tuple entries (freq1, freq2, duration, amplitude)
|
|
; Single frequencies are created by setting freq1 or freq2 to zero.
|
|
;
|
|
; |m - Morse escape sequence
|
|
;
|
|
; Sends Morse code at the telemetry amplitude and telemetry frequency as defined in the
|
|
; [morse] section.
|
|
;
|
|
; Follow with an alphanumeric string
|
|
;
|
|
; |i - Morse ID escape sequence
|
|
;
|
|
; Sends Morse code at the ID amplitude and ID frequency as defined in the
|
|
; [morse] section.
|
|
;
|
|
; Follow with an alphanumeric string
|
|
|
|
|
|
;ct1=|t(350,0,100,2048)(500,0,100,2048)(660,0,100,2048)
|
|
;ct2=|t(660,880,150,2048)
|
|
;ct3=|t(440,0,150,2048)
|
|
;ct4=|t(550,0,150,2048)
|
|
;ct5=|t(660,0,150,2048)
|
|
;ct6=|t(880,0,150,2048)
|
|
;ct7=|t(660,440,150,2048)
|
|
;ct8=|t(700,1100,150,2048)
|
|
;remotetx=|t(2000,0,75,2048)(0,0,75,0)(1600,0,75,2048);
|
|
;remotemon=|t(1600,0,75,2048)
|
|
;cmdmode=|t(900,903,200,2048)
|
|
;functcomplete=|t(1000,0,100,2048)(0,0,100,0)(1000,0,100,2048)
|
|
|
|
|
|
;[morse]
|
|
|
|
;speed=20 ; Approximate speed in WPM
|
|
;frequency=800 ; Morse Telemetry Frequency
|
|
;amplitude=4096 ; Morse Telemetry Amplitude
|
|
;idfrequency=330 ; Morse ID Frequency
|
|
;idamplitude=2048 ; Morse ID Amplitude
|
|
|
|
;[nodes]
|
|
|
|
;000 = context_A@foo.bar.com/1234,foo.bar.com
|
|
;001 = context_B@baz.waldo.com/4321,baz.waldo.com
|
|
;002 = context_C@pepper.salt.com/5678,pepper.salt.com,y ; this is a remote
|
|
|
|
;of course, you can also specify these with domain names, but why rely
|
|
;on DNS working unnecessarily?
|
|
|
|
;[memory]
|
|
|
|
;; this example gives you 146.460, simplex, 100.0 HZ PL, hi-power, transmit PL
|
|
;00 = 146.460,100.0,sht
|
|
;; this example gives you 146.940, minus offset, 100.0 HZ PL, low-power, no PL
|
|
;01 = 146.940,100.0,-l
|
|
|
|
; The format for these entries is: Receive-Freq,Receive-PL,Attrbutes
|
|
; Attributes: l=low power, m=medium power, h=high power, -=minus offset,
|
|
; s=simplex, +=plus offset, t=tx PL enable, r=rx PL enable
|
|
|