104 lines
4 KiB
Text
104 lines
4 KiB
Text
;
|
|
; MGCP Configuration for Asterisk
|
|
;
|
|
[general]
|
|
;port = 2427
|
|
;bindaddr = 0.0.0.0
|
|
|
|
;------------------------------ JITTER BUFFER CONFIGURATION --------------------------
|
|
; jbenable = yes ; Enables the use of a jitterbuffer on the receiving side of a
|
|
; MGCP channel. Defaults to "no". An enabled jitterbuffer will
|
|
; be used only if the sending side can create and the receiving
|
|
; side can not accept jitter. The MGCP channel can accept jitter,
|
|
; thus an enabled jitterbuffer on the receive MGCP side will only
|
|
; be used if the sending side can create jitter and jbforce is
|
|
; also set to yes.
|
|
|
|
; jbforce = no ; Forces the use of a jitterbuffer on the receive side of a MGCP
|
|
; channel. Defaults to "no".
|
|
|
|
; jbmaxsize = 200 ; Max length of the jitterbuffer in milliseconds.
|
|
|
|
; jbresyncthreshold = 1000 ; Jump in the frame timestamps over which the jitterbuffer is
|
|
; resynchronized. Useful to improve the quality of the voice, with
|
|
; big jumps in/broken timestamps, usually sent from exotic devices
|
|
; and programs. Defaults to 1000.
|
|
|
|
; jbimpl = fixed ; Jitterbuffer implementation, used on the receiving side of a MGCP
|
|
; channel. Two implementations are currently available - "fixed"
|
|
; (with size always equals to jbmax-size) and "adaptive" (with
|
|
; variable size, actually the new jb of IAX2). Defaults to fixed.
|
|
|
|
; jblog = no ; Enables jitterbuffer frame logging. Defaults to "no".
|
|
;-----------------------------------------------------------------------------------
|
|
|
|
;[dlinkgw]
|
|
;host = 192.168.0.64
|
|
;context = default
|
|
;canreinvite = no
|
|
;line => aaln/2
|
|
;line => aaln/1
|
|
|
|
;; The MGCP channel supports the following service codes:
|
|
;; # - Transfer
|
|
;; *67 - Calling Number Delivery Blocking
|
|
;; *70 - Cancel Call Waiting
|
|
;; *72 - Call Forwarding Activation
|
|
;; *73 - Call Forwarding Deactivation
|
|
;; *78 - Do Not Disturb Activation
|
|
;; *79 - Do Not Disturb Deactivation
|
|
;; *8 - Call pick-up
|
|
;
|
|
; known to work with Swissvoice IP10s
|
|
;[192.168.1.20]
|
|
;context=local
|
|
;host=192.168.1.20
|
|
;callerid = "John Doe" <123>
|
|
;callgroup=0 ; in the range from 0 to 63
|
|
;pickupgroup=0 ; in the range from 0 to 63
|
|
;nat=no
|
|
;threewaycalling=yes
|
|
;transfer=yes ; transfer requires threewaycalling=yes. Use FLASH to transfer
|
|
;callwaiting=yes ; this might be a cause of trouble for ip10s
|
|
;cancallforward=yes
|
|
;line => aaln/1
|
|
;
|
|
|
|
;[dph100]
|
|
;
|
|
; Supporting the DPH100M requires defining DLINK_BUGGY_FIRMWARE in
|
|
; chan_mgcp.c in addition to enabling the slowsequence mode due to
|
|
; bugs in the D-Link firmware
|
|
;
|
|
;context=local
|
|
;host=dynamic
|
|
;dtmfmode=none ; DTMF Mode can be 'none', 'rfc2833', or 'inband' or
|
|
; 'hybrid' which starts in none and moves to inband. Default is none.
|
|
;slowsequence=yes ; The DPH100M does not follow MGCP standards for sequencing
|
|
;line => aaln/1
|
|
|
|
; known to work with wave7optics FTTH LMGs
|
|
;[192.168.1.20]
|
|
;accountcode = 1000 ; record this in cdr as account identification for billing
|
|
;amaflags = billing ; record this in cdr as flagged for 'billing',
|
|
; 'documentation', or 'omit'
|
|
;context = local
|
|
;host = 192.168.1.20
|
|
;wcardep = aaln/* ; enables wildcard endpoint and sets it to 'aaln/*'
|
|
; another common format is '*'
|
|
;callerid = "Duane Cox" <123> ; now lets setup line 1 using per endpoint configuration...
|
|
;callwaiting = no
|
|
;callreturn = yes
|
|
;cancallforward = yes
|
|
;canreinvite = no
|
|
;transfer = no
|
|
;dtmfmode = inband
|
|
;line => aaln/1 ; now lets save this config to line1 aka aaln/1
|
|
;callerid = "Duane Cox" <456> ; now lets setup line 2
|
|
;callwaiting = no
|
|
;callreturn = yes
|
|
;cancallforward = yes
|
|
;canreinvite = no
|
|
;transfer = no
|
|
;dtmfmode = inband
|
|
;line => aaln/2 ; now lets save this config to line2 aka aaln/2
|